|
Post by productioncrew on Oct 23, 2020 17:00:08 GMT
Looking for ideas, new helments/head gear/hats to be added to this set. Types, styles? Thanks!
|
|
|
Post by stevo0113 on Oct 23, 2020 21:17:48 GMT
Nice surprise i like the look of these,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 24, 2020 5:29:22 GMT
Dear Production Crew,
I am pleased that these are in line for re-stocking and even better that additions are planned, particularly since they are perfect as any British-style uniformed/equipped troops.
I'd not like to see any of the poses removed from this excellent set, but if it is being expanded, and depending on how many additions could be included, perhaps:
- some additional heads with gas-masks on, - a Lewis gunner running or marching (weapon on shoulder), - other marching poses, - rifle grenade, - in body armour, - casualty figures, - crouching/prone figures, - running in a hunched over-type pose (i.e. semi-ducking), - officer in helmet, - senior officers (around a map perhaps), - caps, slouch hats or other additional heads for troops outside the front line.
Regards, James
|
|
|
Post by Ironsides on Oct 24, 2020 8:44:26 GMT
Since this is a combat set and the Canadian all ranks wore the brodie helmet in the combat zone soft hats are not really appropriate this includes the officer...
So what are we left with the only thing appropriate would be gasmask with brodie (tin hat) heads... Other items:
Nell the messenger dog.. a Collie
Man portable Back Pack sized Wicker Pidgeon box and Pidgeon... Telescope and Signalling equipment...
Figures wearing brodies:
Infantryman firing Mills Rifle grenade launcher.. Assault troops in Dayfield body shield attacking with grenades, one throwing, one handing grenades, one rifleman in defence or something similar... Signaller and companion unarmoured no weapons using gear...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 24, 2020 10:01:20 GMT
What about a pose or 2 of chaps "going over the top"? The war as a whole conjures up images of those poor souls being ordered out of the trenches over no mans land, in another suicidal attack. As someone else said, a pose or 2 of someone falling wounded would go along with that image. There are already a few advancing poses pictured which would go with these ideas. Together with the other "action" poses already listed, this would then be quite a comprehensive WWI set.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 24, 2020 12:36:16 GMT
Since this is a combat set and the Canadian all ranks wore the brodie helmet in the combat zone soft hats are not really appropriate this includes the officer...
So what are we left with the only thing appropriate would be gasmask with brodie (tin hat) heads... Other items:
Nell the messenger dog.. a Collie
Man portable Back Pack sized Wicker Pidgeon box and Pidgeon... Telescope and Signalling equipment...
Figures wearing brodies:
Infantryman firing Mills Rifle grenade launcher.. Assault troops in Dayfield body shield attacking with grenades, one throwing, one handing grenades, one rifleman in defence or something similar... Signaller and companion unarmoured no weapons using gear...
I like those suggestions Ironsides.
They are, of course, 'Canadian' in name only as they are perfect for British & Empire troops, so could be expanded further, depending on how large a set that is envisaged to be created!
Regards, James
|
|
|
Post by Chris D on Oct 24, 2020 20:55:24 GMT
This set is a must for later WW1 fans.
The major improvement I would suggest is for proper faces and helmet straps.
Faces make the figure come to life and their absence spoils an otherwise great offering.
Best wishes,
Chris
|
|
|
Post by productioncrew on Oct 24, 2020 21:01:52 GMT
Sorry, to make it clear currently we are only exploring heads or different types of heads.
|
|
Boom boom out go the lights
Guest
|
Post by Boom boom out go the lights on Oct 25, 2020 15:40:00 GMT
So Brodie helmets / chinstraps / faces please.
Some wearing gasmasks for variety.
Perhaps some heads with Portugese helmets (see main Hat page for conversions), nobody makes them.
|
|
|
Post by Lunch on Oct 25, 2020 22:57:56 GMT
Were the Portuguese in WWI?
|
|
|
Post by Ironsides on Oct 26, 2020 0:23:36 GMT
Yes... the uniform is very similar to the British but blue grey and the Portuguese helmet is like the brodie but fluted.. but I do believe they also recieved supplys from the British particularly later in the war.. if I remember right they took a hammering during the 1918 German offensive...
|
|
|
Post by Lunch on Oct 26, 2020 0:34:22 GMT
How did they ever get dragged into the war, being on the end of Europe and separated by Spain. Guess I’ll have to read up about them
|
|
|
Post by Ironsides on Oct 26, 2020 9:13:10 GMT
I think all you really need to do is paint them up in a different colour uniform to represent Portugeuse for the late war, though some heads with fluted helmets could be included in any appropriate British set early or late... but its not necesarily exact.
Landships has a few threads about the Portuguese equipment and Uniforms etc this is maybe of interest... the Brodie was apparantly more popular, declared war in march 1916 I do believe as a result of a German declaration of war.
A set of helmeted heads would be usefull to include in sets that dont otherwise have helmets usually I would buy a donor set or use spares..... gas masks would be a bonus. The early brodie has a broader rim the later is narrower, both were used together, though I expect the difference in this scale would be negligible.
|
|
|
Post by harlow on Oct 26, 2020 11:04:54 GMT
Wonderful figures which are much desired. I will buy certainly some boxes.
My remarks: The officer should have really a helmet... I a missing hurtful a marching pose. The soldiers were much more marching than shooting. One pose would been very helpful - eventually instead of the kneeing pose.
|
|
|
Post by John the Red on Oct 31, 2020 16:30:21 GMT
Hi
Getting this set back out on the shelves is the main thing. If you want to add to it then the main extra should be head in gasmask & helmet. Other than that, it was near perfect IMHO
cheers
|
|
|
Post by RC on Nov 4, 2020 18:07:45 GMT
This set is a must for later WW1 fans. The major improvement I would suggest is for proper faces and helmet straps. Faces make the figure come to life and their absence spoils an otherwise great offering. Best wishes, Chris 1. Officer with Brodie (pity cannot change the 'pigeon shooting pose!) 2. Gas mask on face with tube to gas mask holder.
|
|
Jordan
Quaestor
New Member ? More like - Newly commissioned from the rank and file...
Posts: 32
|
Post by Jordan on Nov 5, 2020 5:38:44 GMT
It is a shame that you can not change two poses for I think the officer should be advancing at a steady pace and be as low as humanly possible with a pistol about level with his hamstring and his left arm waving his men on. Of course he's wearing a helmet and should look good amongst the advancing figures. The point I am trying to capture here is the troops advancing as close as possible to the creeping artillery barrage that is just in front of them...
I am not quite sure what the third figure from the left in the first row in the drawings is doing. In that regard I see him as the perfect figure to be replaced to truly make this set "Canadian" and not late war British or British Empire troops. I would have loved to see a sniper figure with an identifiable straight-pull bolt action Ross Rifle Mk. III that would have been only issued to snipers at this point in the war.
Regards,
Jordan.
|
|
|
Post by Bersaglieri on Nov 17, 2020 11:29:33 GMT
Some rifle grenades poses? I have been searching for British rifle grenades for years, but there are not many, or even none. In the WWI US boxes, there is a rifle grenade, in WWI ANZAC heavy weapons, there is rifle grenades, why do not we include one for the Anglo-Canadian?
Another pose maybe the Lewis team or Vickers team on moving. It is not a really good idea, but considering the box is really huge, maybe include some is acceptable?
Fur coats. If it is Canadian, they may have the fur coats for winter, so a figure or two with fur looking coat will be pretty cool, and makes the set so unique.
Changeable heads can be included, with the cap, the Brodie with its linen covers, gas mask with Brodie, and maybe a head without any headwear.
-----------------------------------------------------
Some unrealistic ideas, but will be super cool to see:
The cool feature can be brought from the WWI US Infantry box, the changeable weapons for the tripod. Vickers machine gun of course is the option, but some other weapons can be adopted. For example, the 1.59 inch QF gun, a British infantry support gun, similar to the French 37mm. True, it did not serve as a real infantry support gun as it intended to be, but it will be cool to have them. Another weapon can be Lewis. I know, Lewis should be a light machine gun, but when 1916 it entered the service, it served as a Heavy Machine Gun first. At that time, a light machine gun is not a common idea, the British Army has no idea how to use Lewis. The first few Lewis was sent to the Heavy Machine Gun units and mounted on the tripod. Later, the units reported Lewis pool performance comparing to Vickers HMG. From that point, the British Army realized it is a mistake to use Lewis as a HMG, but a portable machine gun instead. And the last weapon can be Hotchkiss, or Colt, or M1917. They are used by Commonwealth forces in WWI,but really limited. But it is not necessary to be the same as the US WWI box, we can have only two or three changeable heavy weapons instead of 4 in the US box.
Body armor, should not be included, but I just wanna see it. Both sides used a lot of body armor in the war. Anglo-Canadian captured many German ones, and some officer may wear the British designed body armor.
Huot-ross automatic rifle never entered the service, but it is a cool and potential weapon. On the trials, it was almost unstoppable against other competitors such as Hotchkiss or Lewis. It is a great weapon, with minor flaws which can be easily fixed, and cheap! It is so cheap compared to Lewis. Farquhar-Hill rifle is another example. It is a semi-auto rifle which was performed well in the trials, ready for production, 100 thousand was issued, but the war ended, and its fate was the same as the Huot-ross.
Trench raiders, I mean basically someone with melee weapons instead of holding a rifle. Many trench raiders were used during an assault, they may carry pistols, but mainly melee weapons and grenades.
|
|
Jordan
Quaestor
New Member ? More like - Newly commissioned from the rank and file...
Posts: 32
|
Post by Jordan on Nov 23, 2020 4:37:50 GMT
If you really want to "Canadianize" this set make a sniper pose with the Ross Mk. III rifle that got scrapped by the (1st) Canadian Division as soon as they found some "previously-enjoyed" Lee-Enfields but it became the weapon of choice for the snipers due to the Ross's superior accuracy... (Since the Ross was designed to be a "competition sporting" rifle from the start...
I not asking you to accurately make the straight-pull bolt of the Ross, as you would have to make the "normal" bolt of the Lee-Enfield to differentiate the two rifles, but please skip the idea of issuing these troops the MacAdam (Hughes) Shield Shovel (Yeah, it's rectangular shovel blade with a loophole that you can use as shield)
Thanks
Jordan
|
|
|
Post by SteveO on Dec 7, 2020 23:48:29 GMT
The kneeling Vickers gunner is the pose that really annoys me about this set and many others. It ends up with the MG being modelled too high - a fault especially noticable with the very crude Maxim in the WW1 Russian heavy weapons set. Gunners would sit on their backsides or lie down unless a trench offered a different option.
|
|