A look back at set #8075 Imperial Roman Command
Aug 25, 2020 20:07:06 GMT
Santi, richard, and 1 more like this
Post by historian on Aug 25, 2020 20:07:06 GMT
More pictures from the archival records. For reasons which are lost to the sands of time, set #8075 Imperial Roman Command is the only HaT set to date which was made by 3 sculptors from 3 different countries (Germany, England and Canada).
The first figure was code named the Fighting Centurion.
Every journey starts off with a single step. In this case this sketch was the first piece of work done on this set. The work officially starts when pen meets paper.
Armor based on this figure (Dan Peterson).
The master figure:
Some more work is needed on the helmet!
Close up of the head
For the next figure a second centurion was chosen, however a musician was made instead. A tubicen was chosen because there were already cornicens on the market.
The centurion who did not make it.
Standard bearer 1
Bare bones
Look at the bottom of his left foot, you can see the base body inside!
Originally with grass under this foot.
Standard bearer 2
Bare bones
This figure was designed with an "open" top hand. In theory the standard would be glued into the groove and then the back of a "hand" painted over it. In practice this was seldom done.
One of our favorite designs, the double duty accessory, did not make it into production.
Two optios. Sometimes repeated parts like heads and torsos could be casted.
Tesserarius, third in command of the century (extra heavy legionary).
Showing the split line.
Some painted examples:
One of each painted by Thomas Willers (Germany) showing each stype of sculpting:
By Takacs Krisztian (Hungary)
Tubicen, Signifier, Aquilifer.
Centurion, Auxiliary Optio, Tesserarius (extra heavy legionary), Legionary Optio.
By Jakub Mroczkowski (Poland)
Tesserarius, note the extra arm protection on his right arm and shoulder and the greaves on both his legs.
Aquila, the eagle of the Legion, carried by an Aquilifer. The Aquilifer was a senior signifer.
Centurion.
From conception to realization:
I hope you have enjoyed this little look-back!
The first figure was code named the Fighting Centurion.
Every journey starts off with a single step. In this case this sketch was the first piece of work done on this set. The work officially starts when pen meets paper.
Armor based on this figure (Dan Peterson).
The master figure:
Some more work is needed on the helmet!
Close up of the head
For the next figure a second centurion was chosen, however a musician was made instead. A tubicen was chosen because there were already cornicens on the market.
The centurion who did not make it.
Standard bearer 1
Bare bones
Look at the bottom of his left foot, you can see the base body inside!
Originally with grass under this foot.
Standard bearer 2
Bare bones
This figure was designed with an "open" top hand. In theory the standard would be glued into the groove and then the back of a "hand" painted over it. In practice this was seldom done.
One of our favorite designs, the double duty accessory, did not make it into production.
Two optios. Sometimes repeated parts like heads and torsos could be casted.
Tesserarius, third in command of the century (extra heavy legionary).
Showing the split line.
Some painted examples:
One of each painted by Thomas Willers (Germany) showing each stype of sculpting:
By Takacs Krisztian (Hungary)
Tubicen, Signifier, Aquilifer.
Centurion, Auxiliary Optio, Tesserarius (extra heavy legionary), Legionary Optio.
By Jakub Mroczkowski (Poland)
Tesserarius, note the extra arm protection on his right arm and shoulder and the greaves on both his legs.
Aquila, the eagle of the Legion, carried by an Aquilifer. The Aquilifer was a senior signifer.
Centurion.
From conception to realization:
I hope you have enjoyed this little look-back!
