|
Post by productioncrew on Oct 23, 2020 5:00:41 GMT
|
|
|
Post by pll on Oct 23, 2020 8:36:44 GMT
Thanks for posting these Production Crew. I like the look of them. I was concerned about some of the musketeers modelling in the test shots (the firing figure) looking a bit spindly as though they had been denied rations for a few weeks. But that doesn't seem to be the case here. They look every bit as good as the SYW Prussian command figures. Pity about not having a horse to go with the officer but I guess the design decision about that was made long ago. Looking forward to all three sets becoming available.
|
|
|
Post by Eliott1014 on Oct 23, 2020 8:38:26 GMT
Good news
|
|
|
Post by Malcolm on Oct 23, 2020 15:01:56 GMT
Although only the Drummer could be used with some future release of Grenadiers I do not understand producing the figures with hats off and not providing two Grenadier Hats (one with front plate and the other without) to replace the Tricorn of the Drummer. Or is there also going to be a Grenadier Command Set with Junior Officers armed with muskets?
|
|
|
Post by Savoia Marchetti on Oct 23, 2020 15:08:02 GMT
Amazing Figures! Very well sculpted, detailed and moulded, in my opinion even better than the already very good Prussians.But apart from the lack of the horse, and times of production, that I expect very long... I ask, why separate hats if in this case there are not optional headgears!? Like I already saw in the sprue of austrian musketeers. Very good instead the decision to provide separate arms and accessories.🙋
|
|
|
Post by rahway on Oct 23, 2020 15:45:57 GMT
Although only the Drummer could be used with some future release of Grenadiers I do not understand producing the figures with hats off and not providing two Grenadier Hats (one with front plate and the other without) to replace the Tricorn of the Drummer. Or is there also going to be a Grenadier Command Set with Junior Officers armed with muskets? There is an officer with a musket in the Grenadier set.
|
|
|
Post by rahway on Oct 23, 2020 15:53:09 GMT
Amazing Figures! Very well sculpted, detailed and moulded, in my opinion even better than the already very good Prussians.But apart from the lack of the horse, and times of production, that I expect very long... I ask, why separate hats if in this case there are not optional headgears!? Like I already saw in the sprue of austrian musketeers. Very good instead the decision to provide separate arms and accessories.🙋 I would think that the mold maker would have to make compromises in the modeling of the cocked hats if they were on the heads since the mold would have to open and close over them. 54MM mold cavities are deeper than 1/72 cavities.
|
|
|
Post by productioncrew on Oct 23, 2020 16:36:14 GMT
I would think that the mold maker would have to make compromises in the modeling of the cocked hats if they were on the heads since the mold would have to open and close over them. 54MM mold cavities are deeper than 1/72 cavities. This is the correct answer. The tricorne cannot be molded on the head with a 2 part mold, a last minute change by the tool maker.
|
|
|
Post by Savoia Marchetti on Oct 23, 2020 20:16:29 GMT
Thanks for the technical explanation, me too thought that the reason was due to the process of production. So for separate arms and accessories, useful to avoid those bad "full spaces" in the figures and to give them more natural appearence. But, when will it be possible to see this set and the other two 1:32 7YW Austrians sets on the market?
|
|
|
Post by rbhjr on Oct 24, 2020 22:44:41 GMT
Excellent looking figures!
7YW is not my period, but these look so good I may have to buy some just to enjoy them.
Cheers
|
|
|
Post by Stan on Oct 30, 2020 7:08:44 GMT
Aah woah! So nice! Really love to see progress in this long term project! Well done HAT, figures look really smooth! Can't wait for their Napoleonic colleagues!
Best regards,
Stan
|
|
|
Post by Dave Lycett on Nov 14, 2020 22:47:08 GMT
Are the Austrian 1/32nd figures available? I don't seem to be able to find any, so wondered if they were only available to those who supported the Kickstarter a while ago?
Also, will they make other nations a d do artillery and cavalry?
These are lovely looking figures and ha e inspired me to obtain some 1/32nd Prussians
|
|
|
Post by Forum Admin on Nov 15, 2020 8:58:34 GMT
They are not on sale yet.
|
|
|
Post by pinotnoir on Nov 15, 2020 22:43:56 GMT
Hi Admin- Be happy to paint a test sprue. Would use HaT French Dragoon horse for the officer.
|
|
|
Post by Malcolm on Nov 16, 2020 9:41:47 GMT
Is this set really going to be released without a proper horse for the mounted officer? By proper I mean with the correct horse furniture.
|
|
|
Post by Lunch on Nov 16, 2020 10:09:27 GMT
I think there are already several command sets without horses.
|
|
|
Post by Ezio Salimbeni on Nov 17, 2020 18:44:25 GMT
I have been waiting for a long time to see these lovely figures, and am beyond pleased with the detail and quality. I assure you when these are released I shall spend an embarrassingly large amount of money on many sets to put under the brush, thank you for sharing these.
|
|
nev
Quaestor
Posts: 4
|
Post by nev on Nov 28, 2020 22:15:35 GMT
Have you a release date yet for these SYW Austrians?
|
|
|
Post by Forum Admin on Nov 29, 2020 4:44:39 GMT
The factory does not have a release date yet.
|
|
nev
Quaestor
Posts: 4
|
Post by nev on Nov 30, 2020 18:46:03 GMT
Thanks, eagerly awaited. My Prussians need someone to shoot at
|
|